Guitar I/O Directly connect your guitars and other instruments to Ensemble using the two front panel 1/4" inputs. The inputs' Class A JFET circuits reproduce the feel and tone of a vintage tube amp for more realistic modeling and add harmonic character to keyboards and other electronic instruments. A "bootstrapping" circuit design provides an ultra-high impedance load to the connected instrument to preserve its tone and high frequency response.
Connect your amp to either 1/4" output for effortless re-amping. Dual mode switching allows you to easily record your direct guitar signal while listening through your amp, then play the recorded signal back through your amp to refine amp settings and mic placement.
You can also use the Guitar I/O inputs & outputs to insert stomp boxes into your session as an alternative to software plugins. Impedance or level mismatches are not a concern - these connections were made for any guitar gear.
Analog Inputs Ensemble features 4 Combo inputs (XLR or 1/4") and 4 XLR inputs for connecting up to 8 microphones or a combination of instruments, external mic preamps, and other analog audio devices. Ensemble's analog inputs now include a line level bypass relay for the purest unity gain signal path to the analog-to-digital converter when the input source is set to line level.
Analog Outputs Ensemble includes 2 balanced monitor outputs on 1/4" TRS connectors and 8 balanced line outputs on 1 D-Sub 25-pin connector. These outputs can be configured for a wide variety of workflows, whether you're integrating Ensemble with an external console, mixing in the box, or any hybrid of the two.
Headphone Outputs With the kind of discrete transistor output stage found on power amps, Ensemble's two independently controlled front panel headphone outputs offer more pristine power than ever before. Drive high impedance headphones louder than you'll ever need while maintaining ultra low distortion throughout the level range.
Built-in Microphone Ensemble features the same high quality built-in mic capsule found in Apogee's ONE for iPad & Mac. Instantly capture your inspirations, keep an audio archive of the session, or record a "crushed room" sound when tracking drums. Most importantly, the built-in mic may be used for talkback.
Analog Inserts Analog inputs 1 and 2 feature the ability to add a hardware insert between Ensemble's built-in mic preamp and analog-to-digital converter stage. Easily integrate your favorite analog compressor or EQ, in mono or as a stereo pair, into your recording chain with separate balanced send and return connector for each channel.
Digital I/O As the centerpiece of your creative setup, Ensemble provides up to 18 channels of digital I/O, in ADAT, SMUX, S/PDIF optical and S/PDIF coaxial formats, to easily integrate expanders, hardware synths and digital effects. Thanks to Thunderbolt's high bandwidth, all of Ensemble's analog and digital I/O are available in your DAW simultaneously.
Word Clock Ensemble provides Word Clock IN and OUT for syncing with other digital audio gear. Use Ensemble as the master clock to take advantage of Apogee's superior built-in clocking technology.
Hybrid of Software and Hardware Apogee pioneered a simplified user interface that has inspired countless other competitors. This is a hybrid approach - essential hardware control complemented by comprehensive software control. Ensemble's front panel represents the next level of refinement, offering the perfect balance of dedicated control and flexibility.
Input control with selection buttons and controller knob Ensemble makes it easy to access all important recording and monitoring functions. Simply press an input selection button on Ensemble's front panel to select a desired input and easily adjust your level with the input controller knob. All input selection buttons feature an LED highlight ring. The highlight ring of the selected input is brighter so you can see at a glance which channel is in focus. Press and hold the input select button to select and adjust different parameters for each channel such as input type, +48v phantom power, Soft Limit, grouping, polarity invert and hi-pass filter.
Dual, high-resolution displays show all input and output details Two high-resolution OLED displays deliver all the visual feedback critical for recording and monitoring. Without looking at your computer, Ensemble lets you see metering, levels, grouping and polarity, muting, phantom power and Soft Limit for all inputs and outputs.
Monitor/Output Controls Ensemble's Monitor control provides everything you need to master your listening environment, without additional devices. Choose between the two 1/4" monitor outputs, one of three stereo speaker sets (depending on which is selected) or a 5.1 surround sound system. Set your speaker and headphone levels with dedicated front panel controller knobs, Maestro level controls or your Mac volume controls.
2 Independently Controlled Front Panel Headphone Outputs and Controls With the kind of discrete transistor output stage found on power amps, Ensemble's two independently controlled front panel headphone outputs offer more pristine power than ever before. Drive high impedance headphones louder than you'll ever need while maintaining ultra low distortion throughout the level range.
Assignable Buttons Four configurable buttons (labeled A, B, C, D) allow you to quickly access functions such as "Engage Talkback", "Mute Outputs", "Dim Outputs", "Sum to Mono", "Clear Meters" or "Engage Speaker Set". Each function can be assigned to a button using a drop-down menu within Apogee's Maestro application.
Talkback When asked to identify his favorite microphone, one savvy producer answered "the talkback mic!" Effortless communication enhances the flow of your session, so Ensemble includes flexible and convenient talkback functionality. Use either Ensemble's Built-in microphone or an external mic to communicate directly with the recording performers through both headphone and line outputs. Engage talkback from Maestro or from the front panel Assignable buttons. No other audio interface offers such a comprehensive talkback system.
Speaker Set Selection Ensemble's assignable buttons can be configured in Apogee's Maestro software to switch between up to 3 pairs of speakers, allowing you to use Ensemble just like a standard monitor controller. Simply connect 1, 2 or 3 pairs of studio monitors and press the corresponding assignable button (A, B, C or D) to select which pair you would like to listen to.
Apogee Ensemble Thunderbolt Audio Interface Features
- Thunderbolt 2 Mac audio interface
- Analog-to-digital conversion (ADC) for recording up to 24-bit/192kHz
- Proprietary Thunderbolt audio driver and ESS Sabre32 DAC offer full 32-bit playback
- Groundbreaking low latency performance
- Core Audio-optimized hardware engine frees your Mac CPU
- 2 high-resolution OLED displays show levels and settings
- Input select buttons and controller knob for convenient selection of parameters and settings
- 4 assignable buttons to control:
- Talkback mic (built-in or external)
- Output settings such as speaker set selection, mute, dim, sum to mono Complete input/output control with Apogee's Maestro software
- Works with Pro Tools, Logic, Ableton and any Core Audio compliant app on Mac
- Designed in California - Assembled in the U.S.A.
Following checkout you will receive a Paypal invoice if your order is in stock or readily available with the manufacturer. Your Paypal account , credit card or debit card will not be charged if your order is not in stock or available with the manufacturer. In stock orders are shipped within 1-2 business days (FEDEX tracking details provided). Un-stocked orders require a special order from the manufacturer and ship within 7-10 business days.
To ensure 100% customer satisfaction , we offer a 14 day return policy and price matching. Our knowledgeable staff are here to help with queries you may have about the . Contact our experts to find the best product to suit your style or request more information.
- Buy products with confidence.
- We ship to all major regions in Australia.
- Return to base repair or replacement (1 Year return to base).
- Please contact us for detailed information about our terms , conditions and warranty.
AudioBuy Australia ship all stocked orders Monday to Friday. All online orders are carefully packed and insured before dispatch. Our customers are very important to us and we will work with you until final delivery to ensure you're completely satisfied.